#Hyper 212 evo pro
#Hyper 212 evo free

The fan(s) rotation speed was adjusted in the entire supported range using our in-house controller by changing the voltage with 0.5 V increment. The lowest noise reading our noise meter device can register is 29.8 dBA and the subjectively comfortable noise level in these testing conditions was around 36 dBA (do not mix it up with low noise level). The tested cooling systems were placed at the edge of the desk on a sheet of polyurethane foam.

The Hyper 212 EVO now features four Cooler Master patented Continuous Direct Contact (CDC) heat pipes that are tightly packed into a flat array on the CPU Cooler base. Sljes enbart som paket och enbart upphmtning. The Hyper 212 EVO cooling systems are designed and optimized to provide the best user experience and cooling potential for a new generation of processors. Flkten och kylaren r lite ltt dammade, men har inte gjort rent allt. psen finns kvar och alla manualer kommer med. The noise meter was installed on a tripod and was always at a 150 mm distance from the cooler fan rotor. Kylare CoolerMaster Hyper Evo 212 3x4GB DDR3 RAM Externt Ethernetkort, d det i moderkortet inte lngre fungerar.

The noise level for each cooler was tested outside the system case when the only noise sources in the lab were the cooler and its fan. The noise level of each cooler was measured between 1:00 and 3:00 AM in a closed room about 20 m2 big using CENTER-321 electronic noise meter. The room temperature during our test session varied between 24.5-24.7☌. The ambient temperature was checked next to the system case with an electronic thermometer with 0.1 ☌ precision that allows hourly monitoring of the temperature changes over the past 6 hours. Moreover, we will also provide a table with the temperature readings for all cores including their average values. We took the maximum temperature of the hottest CPU core for the results charts. The stabilization period for the CPU temperature between the two test cycles was about 8-10 minutes. The CPU was loaded with two consecutive CST test runs with the settings as indicated above.

#Hyper 212 evo free

The nominal processor Vcore was increased to 1.3875 V in the mainboard BIOS: Shop Cooler Master Hyper 212 EVO V2 CPU Air Cooler online in Pakistan including Karachi, Lahore, Islamabad, Peshawar along with FREE Delivery, Warranty and. We overclocked our six-core processor (with its default non-lapped heat-spreader) with the multiplier set at 25x and “Load-Line Calibration” (Level 2) enabled to 4.3 GHz.

Power supply: Xigmatek “No Rules Power” NRP-HC1501 1500 W (with a default 140 mm fan).

Control and monitoring panel: Zalman ZM-MFC2.

#Hyper 212 evo pro

System case: Antec Twelve Hundred (front panel: three Noiseblocker NB-Multiframe S-Series MF12-S2 fans at 1020 RPM back panel: two Noiseblocker NB-BlackSilent PRO PL-1 fans at 1020 RPM top panel: standard 200 mm fan at 400 RPM).

Backup drive: Samsung Ecogreen F4 HD204UI (SATA-II, 2 TB, 5400 RPM, 32 MB, NCQ).

Drive for programs and games: Western Digital VelociRaptor (300GB, SATA-II, 10000 RPM, 16MB cache, NCQ) inside Scythe Quiet Drive 3.5” HDD silencer and cooler.

System drive: RAID-0 of 2 x Kingston V-series SNV425S2128GB SSD (SATA-II, 128 GB, MLC, Toshiba TC58NCF618G3T controller).Memory: DDR3 3 x 2 GB OCZ Platinum Low-Voltage Triple Channel (Spec: 1600MHz / 7-7-7-24 / 1.65 V).Graphics card: Asus Radeon HD 6770 DirectCU Silent (EAH6770 DCSL/2DI/1GD5) GDDR5 128 bit, 850/4000 MHz (with a passive heatsink from the DeepCool V4000 VGA cooler).Processor: Intel Core i7-980X Extreme Edition, 3.33 GHz, 1.225 V, 6 x 256 KB L2, 12 MB 元 (Gulftown, B1).Mainboard: Gigabyte GA-X58A-OC (Intel X58 Express, LGA 1366, BIOS F5c from ).Universal retention brackets are compatible with latest Intel and AMD socket CPU.We performed all cooler tests inside a closed system case. Tool-free mounting system ensures hassle-free installation. More than 10% decreased of fan noise level from previous model. Low vibrations and quiet fan allows for nearly inaudible levels. Newly Optimized blade design with updated curve that provides best balance between airflow and static pressure to take the heat away while remain extremely silence. These small and chaotic turbulences produce strong gusts that reduce overall airflow but improve airflow where it matters the most - next to the heatpipes DIRECT CONTACT TECHNOLOGYĤ heatpipes with Direct Contact Technology creates a sleek contact surface area for maximize heat dissipation SICKLEFLOW 120 FAN Positioned in a 45-degree angle and surrounding the heatpipe, each fin-blade features X-shaped vents that create areas of high and low air pressure, resulting in several controlled vortices. The asymmetrical heat pipe design ensures RAM compatibility and clearance space X-VENTS DESIGN